MGS have chosen the Systech Illinois MM510 moisture analyser to measure the moisture and water vapour within their medical grade oxygen.
The electrolytic, phosphorous pentoxide (P2O5) analyser is ideal for this application, conforming to the European Pharmacopoeia standard.
The moisture content in medical oxygen can range from less than 1ppm up to 60ppm, this challenging range can be accommodated by the MM510 which auto-ranges from 0.01 to 1000 ppm. It also offers the option of auto-calibration and incorporates a new, long life, P2O5 electrolytic moisture sensor of the highest quality.
John Hennigan, Compliance Manager at Medical Gas Solutions says, “In my 11 years’ experience involved in the manufacture and quality control of medical gases, the accurate measurement of moisture content has always been a challenge but a necessary requirement, in order to ensure that the medical gases manufactured meet the specification requirements of the relevant European Pharmacopoeia monographs.”
... to continue reading you must be subscribed
